Pneumatic Portable Telescopic Pole – Fakopp
The portable pneumatic pole for anemometer is a pole which can be used alone as well. No special assembling of the pole itself is needed. Only the holding ropes should be fixed correctly. The packed pole is about only 2 m long, but it can be erected to 10m height. Both the extending and the collapsing of the tower can be done alone by one person.
- Goods imported on order and payment.
- Delivery times will be advised upon placing an order.
- Estimated lead times.
- Remote training is included with this item.
More Information
– Fix the base and the fasten spikes to the proper positions.
– Fix the shorter ropes to the fasten spikes and to the lower fixing triangles. Put the anemometer to its position.
– Connect the compressor to the base and start the erection. When the extension is finished disconnect the compressor. Measure.
– After the measurement let the tubes slide back.
In the package
– alu tube (2 m – 10 m) 17kg
– compressor
– battery for the compressor
– 3 pieces 7 m ropes
– 3 pieces 13 m ropes
– 3 pieces 250-300 mm nails
– 3 pieces anchoring spikes
– hammer
– case
Technical bit
– Maximal height: 10 m
– Maximal loading capacity: 2 kg
– Maximum allowable wind speed: 33 m/s
– Weatherproof: yes, IP65
Resources
Pneumatic Portable Telescopic Pole Manual
Related Products
Related Products
-
Range of Piezo Sensors including SDO2/60
-
Pull Test Devices – ‘Inclino & Elasto ‘Root and Trunk safety evaluation
-
Pull Test Devices – Inclino – Root (Only) safety evaluation
-
Fakopp Sonic Tree Root Detector
-
Fakopp Tree root detector With Deeper soil sensor
-
Soil Sensor Exchangeable Nails
-
Weldmeister Caliper 100cm
-
FAKOPP Digital Caliper ( 0mm to 1999mm)
-
Free Crown area measurement by Fakopp Arborsonic
-
Fakopp Tree Pull
-
Inclinometers – For tree stability testing
-
Elastometer + 2 Inclinometers (For DynaTree/DynaRoot)
Stay Informed.
Get the Latest on Tree Surveying Tools and Training
